Home > Access List

Access List

August 6th, 2017 in ROUTE 300-101 Go to comments

Question 1


The first answer is not correct because the network range is not correct. It should be to

Question 2


Logging-enabled access control lists (ACLs) provide insight into traffic as it traverses the network or is dropped by network devices. Unfortunately, ACL logging can be CPU intensive and can negatively affect other functions of the network device. There are two primary factors that contribute to the CPU load increase from ACL logging: process switching of packets that match log-enabled access control entries (ACEs) and the generation and transmission of log messages.

Process switching is the slowest switching methods (compared to fast switching and Cisco Express Forwarding) because it must find a destination in the routing table. Process switching must also construct a new Layer 2 frame header for every packet. With process switching, when a packet comes in, the scheduler calls a process that examines the routing table, determines which interface the packet should be switched to and then switches the packet. The problem is, this happens for the every packet.

Reference: http://www.cisco.com/web/about/security/intelligence/acl-logging.html

Question 3


If you use the “debug ip packet” command on a production router, you can bring it down since it generates an output for every packet and the output can be extensive. The best way to limit the output of debug ip packet is to create an access-list that linked to the debug. Only packets that match the access-list criteria will be subject to debug ip packet. For example, this is how to monitor traffic from to

access-list 100 permit ip
debug ip packet 100

Note: The “debug ip packet” command is used to monitor packets that are processed by the routers routing engine and are not fast switched.

Question 4

Question 5

Question 6

Question 7

Question 8


Question about restricting IPv6 access to SSH. Had to pick 2 answers. One that is applied to the fa0/0 and one that is applied to vty lines. Its basically IN or OUT.

Question 9


The established keyword is only applicable to TCP access list entries to match TCP segments that have the ACK and/or RST control bit set (regardless of the source and destination ports), which assumes that a TCP connection has already been established in one direction only. Let’s see an example below:

access-list_established.jpgSuppose you only want to allow the hosts inside your company to telnet to an outside server but not vice versa, you can simply use an “established” access-list like this:

access-list 100 permit tcp any any established
access-list 101 permit tcp any any eq telnet
interface S0/0
ip access-group 100 in
ip access-group 101 out


Suppose host A wants to start communicating with host B using TCP. Before they can send real data, a three-way handshake must be established first. Let’s see how this process takes place:


1. First host A will send a SYN message (a TCP segment with SYN flag set to 1, SYN is short for SYNchronize) to indicate it wants to setup a connection with host B. This message includes a sequence (SEQ) number for tracking purpose. This sequence number can be any 32-bit number (range from 0 to 232) so we use “x” to represent it.

2. After receiving SYN message from host A, host B replies with SYN-ACK message (some books may call it “SYN/ACK” or “SYN, ACK” message. ACK is short for ACKnowledge). This message includes a SYN sequence number and an ACK number:
+ SYN sequence number (let’s called it “y”) is a random number and does not have any relationship with Host A’s SYN SEQ number.
+ ACK number is the next number of Host A’s SYN sequence number it received, so we represent it with “x+1”. It means “I received your part. Now send me the next part (x + 1)”.

The SYN-ACK message indicates host B accepts to talk to host A (via ACK part). And ask if host A still wants to talk to it as well (via SYN part).

3. After Host A received the SYN-ACK message from host B, it sends an ACK message with ACK number “y+1” to host B. This confirms host A still wants to talk to host B.

Question 10

Question 11


Reflexive access lists provide filtering on upper-layer IP protocol sessions. They contain temporary entries that are automatically created when a new IP session begins. They are nested within extended, named IP access lists that are applied to an interface. Reflexive access lists are typically configured on border routers, which pass traffic between an internal and external network. These are often firewall routers. Reflexive access lists do not end with an implicit deny statement because they are nested within an access list and the subsequent statements need to be examined.

Reference: http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_acl/configuration/15-1s/sec-access-list-ov.html

Question 12


The command “ipv6 traffic-filter access-list-name { in | out }” applies the access list to incoming or outgoing traffic on the interface.

Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_55_se/configuration/guide/scg3750/swv6acl.html

Question 13

Question 14

Comment pages
1 2 1058
  1. Anonymous
    November 29th, 2016

    anyone pls. share latest CCNP Dumps 149, taqwa dumps….
    email: ultimate.01 @ outlook . com

  2. Ussy
    December 6th, 2016

    Please anyone with lastest dump – can email me at: {email not allowed}


  3. Ussy
    December 6th, 2016

    Please anyone with lastest dump – can send to me at kinzplay @ Hotmail . com

  4. Anonymous
    December 6th, 2016

    please send route dump to me please!
    teds2sscamaro at gmail dot com

    thank you!

  5. prakesh
    December 6th, 2016

    Dear all I want to try CCNP Route exam, so I need latest questions and answer . If you have latest PDF please send to {email not allowed}

  6. Rob
    December 7th, 2016

    Can anyone send me the latest CCNP Route dump to rawiemsm @ gmail . com
    Much appreciated

  7. shwgito
    December 19th, 2016

    hi please send me 149Q and TAGWA last dumps at {email not allowed}

  8. Jenkins
    December 20th, 2016

    Hi guys i am getting to my ROUTE exam next week, so I would need your help can you please send 149q+41q dumps or something that is valid to:
    CanIgetdumps at mail dot com
    Thank you!!

  9. cesacal
    December 25th, 2016

    Hi guys, I´m taking my 300-101 exam next February. Could anyone please send my the latests dumps:
    c e s a c a l @ g m a i l . c o m

  10. Anonymous
    December 29th, 2016

    can anyone send me the new question o.ogbola @ gmail dot com

  11. Anonymous
    January 4th, 2017

    Can someone comment about dumps in january? are they the same or any different questions?

  12. Ruber
    January 5th, 2017

    Passed the CCNA yesterday! I used the ebay dump in particular posted by “Tanzir” and can attest that it is valid. Cheers!

  13. Ruber
    January 5th, 2017

    I mean CCNP :P

  14. CCNP 301-101 exam
    January 6th, 2017

    please send me the most recent dump to thenetworkdummy @gmail .com

  15. Answers but no questions
    January 6th, 2017

    I see the answers for the route exam, but not the questions.

  16. Anonymous
    January 8th, 2017

    where are the questions

  17. Anonymous
    January 8th, 2017

    all these are answere or explanation where i can get questions

  18. Anonymous
    January 9th, 2017

    can some one tell me that where are the questions of these explanations?

  19. Allie
    January 10th, 2017

    jilla tamil mp3 – myfreemp3.review/search/jilla-tamil-mp3/
    download free music

  20. df
    January 15th, 2017

    Download 41q + 150q PDF
    vce exam file
    vce cracked version

    (Remove # and go to the link to download)

  21. kunal
    January 16th, 2017

    dumps on kunal18oct(AT)gmail.co,

  22. kunal
    January 16th, 2017

    dumps on kunal18oct(AT)gmail.com

  23. zerocool114
    January 16th, 2017

    please send me the latest valid dump to dchaps @ yahoo dot com have date this saturday.

  24. zerocool114
    January 16th, 2017

    please send me the latest valid dump to dchaps_kevin @ yahoo dot com have date this saturday.

  25. zerocool114
    January 16th, 2017

    please send me the latest valid dump to {email not allowed} have date this saturday.

  26. Anonymous
    January 20th, 2017

    guys it looks like the exam has changed any updates

  27. gre
    January 23rd, 2017


    I think we’re starting to get some positive feedbacks under “share your experience” page……

  28. Anonymous
    January 27th, 2017

    please send me the latest valid dump to revladimir @ mail . ru

  29. Jane woken
    February 2nd, 2017

    can somebody tell me please that what is the last question of 40Q of TAGWA , in my life there is no answer of question “Meaning of priority 0 configured in ospf router?” .

  30. Jane woken
    February 2nd, 2017

    can somebody tell me please that what is the last question of 40Q of TAGWA , in my life there is no answer of question “Meaning of priority 0 configured in ospf router?” . Plus what it the correct answer for the following questions?
    Question 2
    Refer to the following configuration command.
    router(config)# ip nat inside source static tcp 8080 80
    Which statement about the command is true?
    A. Any packet that is received in the inside interface with a source IP port address of is translated to
    B. Any packet that is received in the inside interface with a source IP port address of is translated to
    C. The router accepts only a TCP connection from port 8080 and port 80 on IP address
    D. Any packet that is received in the inside interface with a source IP address of
    is redirected to port 8080 or port 80.


    Question 28
    A network engineer wants to ensure an optimal end-to-end delay bandwidth product. The delay is
    less than 64 KB. Which TCP feature ensures steady state throughput?
    A. Window scaling
    B. Network buffers
    C. Round-trip timers
    D. TCP acknowledgments

    some people said the answer is wrong of TAGWA file. Please help

  31. Vince
    February 2nd, 2017

    you want NAT to redirect packets from the outside destined for to You can use a
    static nat
    command in order to translate the TCP port number
    to achieve this. A sample configuration is shown here.
    Configuring NAT to Redirect TCP Traffic to Another TCP Port or Address
    Note that the configuration description for the static NAT command indicates any packet received
    in the inside interface with a source address of is translated to
    This also implies that any packet received on the outside interface with a destination address of has the destination translated to
    The final step is to verify that NAT is operating as intended.
    show ip nat translations
    Pro Inside global Inside local Outside local Outside global
    tcp — —
    Example: Using NAT During a Network Transition
    Deploying NAT is useful when you need to readdress devices on the network or when you replace
    one device with another. For instance, if all devices in the network use a particular server and this
    NAT Router
    interface ethernet 0
    ip address
    ip nat inside
    !— Defines Ethernet 0 with an IP address and as a NAT
    inside interface.
    interface serial 0 ip address ip nat outside
    Defines serial 0 with an IP address and as a NAT outside
    ip nat inside source static tcp
    8080 80
    !— Static NAT command that states
    any packet received in the inside !— interface with a
    source IP address of is !— translated
    to 172.16.1


  32. Anonymous
    February 4th, 2017

    Jane, ospf priority only comes into play when you’re talking a broadcast network (think Ethernet). In this case, a DR and BDR are elected. To be able to participate in the election process, the ospf priority on an interface must be 1 or greater. If it’s set to 0, it will not participate in this election process.

  33. Anonymous
    February 4th, 2017

    Can someone explain why answer D (and not A) is correction for question 4?

  34. PassCCNP
    February 4th, 2017

    who have got latest 300-101 dump pls send to azecisconetwork at gmail.com

  35. Abu
    February 6th, 2017

    Abu February 6th, 2017
    anyone have 300-101 up to date dumps, I have 300-115 up to date dumps. we can exchange. email me ayousufzai at gmail.com

  36. george
    February 11th, 2017

    At this link it said: “If you enable CEF and then create an access list that uses the log keyword, the packets that match the access list are not CEF switched. They are fast switched. Logging disables CEF.”


    I’m confused…What is correct?

  37. Kraig
    February 14th, 2017

    En la parte menos pública accesible de la web
    donde se transan secretos industriales y póliticos y se comercia con todo género de recursos y commodities, muchos de ellos ilegales. http://www.braintuitions.com/index.php/component/k2/itemlist/user/611209

  38. Wilburn Stefano
    February 23rd, 2017

    This info is priceless. How can I find out more?|


  39. sig
    February 28th, 2017

    SOS,Someone,please send latest dumbs to sigm3618@gmail dot com

  40. Anonymous
    March 7th, 2017
  41. Anonymous
    March 25th, 2017

    Could you please send me the latest dumps of CCNP Route (300-101)!!! {email not allowed}

  42. nextinline
    April 3rd, 2017

    please someone email me the newest dump narcisse.aspilaire at gmail thank you in advance, anything that would help greatly appreciated

  43. ccnp
    April 8th, 2017

    Why are the questions not displayed ?

  44. shishir
    April 19th, 2017

    Hi All,
    Kindly let me know is there any change in syllabus?

  45. Anonymous
    April 23rd, 2017

    What is the display output of command Ip Cache flow? Please answer important for CCNP Route exam ?

  46. logipy
    May 20th, 2017

    Everything you need to pass the exam.
    Thank you friends of digital.tut.
    Compilation of exams and including April and May.
    the pass is

  47. Anonymous
    May 28th, 2017

    Hi logipy

    Some of your responses are not correct, please update them

  48. Anonymous
    June 1st, 2017

    Hello anyone, can you help me with the dumps Route and TSHOOT?

    My e-mail is: info AT anemosradio.com

    Thank you!

  49. Anonymous
    June 8th, 2017

    Can anyone please share latest dump of 300-101 Routing at {email not allowed}.

  50. Bruh
    June 18th, 2017

    Hey can anyone provide some information about any valid CCNP Route dumps please. I saw this post by @logipy and wanted to know which dumps to follow and if the 9tut dumps are also valid or not?
    Thanks in advance.

  51. vjay
    June 19th, 2017

    Recently, anyone passed CCNP-route exam? anyone have latest valid dumps?

  52. samar
    June 27th, 2017

    anyone passed CCNP-route exam? anyone have latest valid dumps?
    send me at {email not allowed}

  53. memo
    July 2nd, 2017


    plz i sent to you…. plz replay

  54. PrenchPries
    July 4th, 2017

    Hi logipy,
    Thank you! Are these dumps from April-May still valid?

    Hi memo,
    Got a reply from Anonymous fro the latest dumps?

  55. abdul omar
    July 8th, 2017

    anyone passed CCNP-route exam? anyone have latest valid dumps? and PDF Questions and answers.

    Please send it to me ( {email not allowed})

  56. Anonymous
    July 10th, 2017

    403Q… IS IT VALID?

  57. ellsworth74
    August 8th, 2017

    What’s up with Q 7 in “Access List” section? Is it not complete?

  58. Sara
    August 13th, 2017

    please send me the latest version of dump file
    I do the exam next month
    sara.faruq21 (a)gmail


  59. Anonymous
    August 16th, 2017

    Can you please send the dumps. I’ve my exam next month
    {email not allowed}

  60. anu
    August 18th, 2017

    Are all the answers correct here?

  61. ACL is important!
    August 23rd, 2017

    ACL is very important guys..be carefull on the exam…
    here is a review with PT example

  62. Anonymous
    August 25th, 2017

    Hello Guys,

    Could some help me by mailing the latest dumps for 300-101 exam.

    Phanindra Ponnada.

  63. Anonymous
    August 25th, 2017

    Failed today with 760pts….although I cleared all my labs , loads of new questions ,don’t trust any dumps…study hard chaps….and loads of simlet ( IPV6 , ACL, NAT, NAT-PT ETC ETC )

    ACL very important ( IPV6 and IPV4 both)

  64. Steffy
    August 27th, 2017

    For latest valid dump with continuous update, please contact me at steffyshirls @ gmail .com

  65. Naveen kumar R
    August 29th, 2017

    Hello guys,

    Im looking for CCNP latest Routing and switching Dumps. If possible can you pls send it to {email not allowed}

    Thanks in Advance.
    Naveen kumar

  66. Mtromblon
    September 7th, 2017

    Hio guys, can you send the latest valid dump

  67. Moreseas
    September 8th, 2017

    Can someone help with latest dumps? ogunseyemoses at gmail

  68. Jovce
    September 14th, 2017

    Hi guys, can someone please send me the latest dumps jovce123 @ gmail .com

    Thanks in advance

  69. John
    September 27th, 2017

    Hi guys, can someone please send me the latest dumps ezrading @ gmail .com

  70. dude
    September 29th, 2017

    Is anyone really sending anything. If anyone can share rjshinigami @ gmail.com

  71. Peter Pan
    October 2nd, 2017

    Question 9. C or D ?

    isn’t 149 be using “extended” ip access-list ?

  72. Peter Pan
    October 2nd, 2017

    Question 15.

    B- shouldn’t it be deny instead ? why permit the port 80 traffic ?

  73. Khal Drogo
    October 3rd, 2017

    “Question 15.
    B- shouldn’t it be deny instead ? why permit the port 80 traffic ?” – Peter Pan

    Exactly!!! Ultimately none of the ACLs are correct. The only relevant details in the answers that properly relate to the question are the “periodic” and “absolute” terms as well as the time ranges. If you just go off of that, then B makes sense.

  74. Peter Pan
    October 4th, 2017

    @ Khal

    yes, “periodic” and” 1.00 – 2359″ would make B the closest answer for the question.


  75. Cornelius
    November 9th, 2017
  76. Donn
    November 9th, 2017

    sharing my collection of dumps https://drive.google.com/open?id=0B5mAFqgydmCzNno3dnFocF9HckU . Passed my CCNP with 8xx + using the ones shared here.

  77. Erwin
    November 9th, 2017

    You can find the it-libraries dumps here https://drive.google.com/open?id=0B5mAFqgydmCzNno3dnFocF9HckU

  78. Axen
    November 9th, 2017

    Hi Please Send me latest Dumps for CCNP route & CCNP Switch exam on–> agosavi99 @ gmail com

  79. durshen
    November 11th, 2017

    Hi everyone, I have the valid dump with me and I’m wiling to share. Please contact me via durshen81 @ gmail .com

  80. Elroy
    November 14th, 2017

    sharing my collection of dumps https://drive.google.com/open?id=0B5mAFqgydmCzNno3dnFocF9HckU . Passed my CCNP with 8xx + using the ones shared here.

  81. Anonymous
    November 17th, 2017

    Hi I am just wondering how can I see questions? Anyone can get me a hint.

  82. Si Dao
    November 17th, 2017

    Please reach to me via email {email not allowed} and show me how to see question on this page.
    Thanks in advance.

  83. Anonymous
    November 23rd, 2017

    where can we find the questions here?

  84. Howard
    November 28th, 2017

    Passed used the 21q dumps from IT-Libraries

  85. Galen
    November 28th, 2017

    Passed, it-libraries questions are still good. check the comments on this forum for the new questions since there are a couple of them posted here.

  86. Corey
    November 28th, 2017

    Thanks all, done with the router. 539q dumps from IT-Libraries are valid. Practice the labs since the ips change on the exam

Comment pages
1 2 1058
  1. No trackbacks yet.